Residential Floor Care Kit - $74.12

Marmoleum Residential floor care kit is environmentally friendly and manufactured from renewable, non-toxic ingredients containing no Volatile Organic Compounds (VOCs). Gentle to the hands, Marmoleum Floor Cleaner leaves behind a fresh, clean fragrance. Specially formulated for use on Forbo Marmoleum linoleum flooring.

Marmoleum®  has a strong, durable protective top layer – Topshield™2. This innovation from Forbo ensures a highly effective shield against
dirt and scuff marks. Marmoleum® with Topshield™2 is ready for use immediately following installation and does not require the application of additional
protective coats of finish. With Topshield™2, your Marmoleum® floor will maintain its beautiful appearance with simple cleaning. Dry dusting is a fast and
easy way to keep your floor free from loose dirt. Remove spots with a mop or
cloth dampened with diluted Forbo Neutral pH Cleaner. Avoid excessive use
of water on the floor, and make sure chair and furniture
legs are covered with felt protectors. An entrance mat
will protect the floor from dirt.

Initial Care Following Installation
1. Remove all surface soil, debris, sand and grit by sweeping, vacuuming or
dust mopping.
2. Mix 1/2 – 1 ounce of Forbo Neutral pH Cleaner per 1 gallon of unheated
tap water.
3. Apply the solution to the floor. Do NOT flood the floor. The solution can
be applied with a mop and bucket.
4. Pick up soil and excess solution with a clean mop. Rinse mops frequently
and change the solution as needed.
5. Rinse the entire floor surface with a clean mop using clean, cool water. Pick
up rinse water with a clean, dry mop or towel.
6. Allow the floor to dry thoroughly before allowing traffic.

Routine Floor Care Procedures
1. Remove all surface soil, debris, sand and grit by sweeping, vacuuming or
dust mopping.
2. Mix 1/2 – 1 ounce of Forbo Neutral pH Cleaner per 1 gallon of unheated
tap water.
3. Apply the solution to the floor. Do NOT flood the floor. The solution can
be applied with a mop and bucket.
4. For ingrained dirt, a non-abrasive scrubbing sponge may be required.
5. Pick up soil and excess solution with a clean mop. Rinse mops frequently
and change the solution as needed.
6. Rinse the entire floor surface with a clean mop using clean, cool water.
Pick up rinse water with a clean, dry mop or towel.
7. Allow the floor to dry thoroughly before allowing traffic.

Spots & Spills
The vast majority of spills can be cleaned off your Marmoleum® satisfactorily.
If there are spills or pet “accidents”:
1. Act quickly.
2. Scrape or blot as much as possible.
3. Mop the floor with a solution of Forbo Neutral pH Cleaner.
4. Damp mop with clean water.
5. If necessary, repeat steps 3 and 4. If the stain persists, as it may with glue,
varnish, paint, ink, tar, cosmetics, shoe polish, some wines, coffee and
some other substances, you may need to allow the solution to sit or “dwell”
on the floor for several minutes. Rub the stained area with a green nylon
kitchen pad then rinse the area with clean water. Repeat if necessary.
If the stain persists, contact Forbo Product Support & Education Services
before trying any other procedures.